Winch (sling coordinates)
- RiftFlyer
- Autor
- Offline
- Hubschrauberfan
-
Weniger
Mehr
- Beiträge: 9
- Dank erhalten: 5
04 Apr 2020 14:13 #3793
von RiftFlyer
Winch (sling coordinates) wurde erstellt von RiftFlyer
I'm trying to edit the coordinates using plane maker so the winch line is aligned with the winch object while it's in the extended operating position ('winde' on custom slider 6). Changing the Lat, Long and Vert coordinate values in the weight and balance menu of plane maker does not seem to have any effect. Are these values independently set within your EC135 Plugin? If so is there any way to adjust them so the winch line is correctly positioned and aligned with the winch?
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- rotorsim
-
- Offline
- Administrator
-
Weniger
Mehr
- Beiträge: 105
- Karma: 18
- Dank erhalten: 42
05 Apr 2020 16:23 #3795
von rotorsim
rotorsim antwortete auf Winch (sling coordinates)
You are right, the coordinates are controlled by the plugin. If you have a cargo hook it is another position for the sling load then with a winch.
Unfortunately the winch is not yet ready for use. One fine day the position will change with the angle of the winch, that will be controllable like in reality. Please be patient.
Unfortunately the winch is not yet ready for use. One fine day the position will change with the angle of the winch, that will be controllable like in reality. Please be patient.
Folgende Benutzer bedankten sich: RiftFlyer
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- Daikan
-
- Offline
- Hubschrauberfan
-
Weniger
Mehr
- Beiträge: 12
- Karma: 2
- Dank erhalten: 16
03 Jan 2021 00:57 #4146
von Daikan
Daikan antwortete auf Winch (sling coordinates)
The plugin already automatically changes the coordinates of the rope suspension according to the extension angle of the winch boom.
You can easily test this using dataref editor/tool and looking at the values of the following datarefs while issuing commands ec135/hoist/out or ec135/hoist/in:
sim/aircraft/overflow/jett_X
sim/aircraft/overflow/jett_Y
sim/aircraft/overflow/jett_Z
You can easily test this using dataref editor/tool and looking at the values of the following datarefs while issuing commands ec135/hoist/out or ec135/hoist/in:
sim/aircraft/overflow/jett_X
sim/aircraft/overflow/jett_Y
sim/aircraft/overflow/jett_Z
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
Moderatoren: Hilli
Ladezeit der Seite: 0.120 Sekunden
