Kapitelauswahl

CPDS (Central Panel Display System)

The CPDS collects all informations about the aircraft and the engines. After power up CPDS starts with a self test. 

Caution and Advisory Display (CAD)

CAD shows in its upper half amber cautions and green advisories. The information is organized in 3 rows. Left row represents system I, right row System II. Middle row shows information about non redundant systems. Cautions are listet in the order of its appearance. Advisories find place below the cautions. If there are more cautions then display lines you can scroll to the next page by pressing SCROLL button. A white line in de middle row indicates that there are more pages. 

When a new caution comes on, all present cautions are hidden. Blinking amber bars indicate the new cautions. Press CAD's SELECT button or CDS/AUDIO RESET on your cyclic to acknowledge the cautions. 

CAD Caution and Advisory Display

The lower part of CAD provides information about fuel tanks. If a Fuel Management System is installed you get also information about fuel flow and estimated remaining flight time. 

Buttons BRT+ and BRT- can be used to control the brightness of the display. 

VEMD (Vehicle and Engine Monitoring Display)

VEMD Vehicle and Engine Monitoring Display

The upper display called FLI (First Limit Indicator) shows important parameters of the engines, i.e. torque (TRQ), turbine outlet temperature (TOT) an N1 speed. If any parameter reaches a temporary allowed range, this is marked by a yellow bar. Exceeds the parameter a limit it is marked by a red blinking bar. 

The needles represent the parameter marked with white boxes. During engine start-up this is TOT, during flight TRQ or the parameter most next to the limit. 

When operating in a yellow range a red word LIMIT comes on. After time limit or parameter limit is reached, the word LIMIT is framed by a red box. Flying under OEI conditions will also activate a counter showing the remaining time in the temporary range. 

Below the needles is an indicator for the mast moment of rotor mast. 

In the upper left and right edge of FLI are displayed some special cautions. 

FLI First Limit Indicator
Symbols used in FLI

The lower display shows in the ELEC/VEH page electrical and pressure parameters and the outside temperature. Press + or - buttons to change the displayed electrical parameters between DC Voltage (DC [V]), battery current (BAT [A]) and generator current (GEN [A]). 

ELEC/VEH Page

Press SCROLL to toggle between ELEC/VEH page and SYSTEM STATUS page, which shows FADEC's parameters. 

After engine shutdown the lower display automatically changes to FLIGHT REPORT page. Here you get information about your flight. Press RESET to go back to ELEC/VEH page. 

CONFIGURATION page shows the equipment of the aircraft. This can only be displayed on the ground while both VEMD displays are switched off. In this situation press OFF1OFF2SELECT within 2 seconds.  

Buttons BRT+ and BRT- can be used to control the brightness of the display. 

Never switch off CAD or VEMD inflight!

Die Partner von rotorsim

microHelis

Herausragende Steuerelemente für die die EC 135. Pedalse, Collective und ein originalgetreuer Stick, auf Wunsch sogar motorisch gesteuert. Diese Controls sind ein Muss für alle, die EC 135 im Simulator fliegen. 

simparts.de

Die Hardware fürs Homecockpit. Die Instrumente von simparts sind von außergewöhnlicher Qualität. Das komplette Programm für ein EC135-Cockpit ist verfügbar. Und alles quasi Plug & Play mit unserer EC 135 Pro. 

DLR

Das Deutsche Zentrum für Luft- und Raumfahrt ist eine renommierte Forschungseinrichtung. In einem Simulator des Instituts für Flugführung wird unser Flugmodell eingesetzt. DLR-Piloten haben die Entwicklung unterstützt. 

sim-aviation.com

 Das ultimative Flugerlebnis in einem EC 135 Full Flight Simulator. Voll instrumentiert, Motion-Plattform, sensationelle Projektion. In Attikon in der Schweiz kommen Anfänger ebenso auf ihre Kosten wie Flugschüler und Profis. 

Heli Simu France

 Gemeinsam mit der französischen HSF haben wir die EC 135 für X-Plane in eine neue Dimension gebracht. Ein hochdetailliertes 3D Modell von HSF wird kombiniert mit unserer einzigartigen Systemtiefe.  

EventCopter 135

 Ein Simulator in einer echten EC135-Zelle! Den EventCopter kann man für Veranstaltungen mieten. Er ist regelmäßiger Gast z.B. bei Tagen der offnen Tür der Air Glaciers und der Air Zermatt. Ein Flugerlebnis der besonderen Art!